Support

Inspire/Matrice PRCS Instruction Manual
Click Here to Download >>

P4 Pro PRCS Instruction Manual
Click Here to Download >>

3DR Solo Pro PRCS Instruction Manual
Click Here to Download >>

The Beast PRCS Instruction Manual
Click Here to Download >>

P2/P3 Quadcharger GO Combo Instruction Manual
Click Here to Download >>

P3 Quadcharger PRO Instruction Manual
Click Here to Download >>

Below is all the technical information on the P2 Quad Charger Products.

P2 QuadCharger GO Manual

P2 Quad Charger PRO Manual

In- Vehicle Charging

Technical Aspects

Power Requirements for Up to Three Inspire/Matrice

P-Squared Group QuadCharger FAQs

Q: Will using the P2 or P3 QuadChargers hurt my DJI batteries?
A: The P2G QuadChargers treat your batteries with care. We monitor voltage, current and temperature with laboratory precision. The charge current is no more than what DJI’s chargers provide, we simply have a more efficient charging profile so the batteries charge faster. And we do 4 batteries at a time!

Q: Will using the P2 or P3 QuadChargers void the warranty on my DJI batteries?
A: DJI’s website has this section on product warranty:
http://store.dji.com/help/return/warranty (Our chargers do not violate any of these conditions.)

Q: Can I use my P2 QuadCharger PRO to charge my Phantom 3 batteries?
A: No. Even though the battery packages are the same size, the charging voltage and current is different for the Phantom 2 and Phantom 3 batteries. Each charger is optimized for the batteries it is intended for.

Q: Can I use my P3 QuadCharger PRO to charge my Phantom 2 batteries?
A: No. Even though the battery packages are the same size, the charging voltage and current is different for the Phantom 2 and Phantom 3 batteries. Each charger is optimized for the batteries it is intended for.

Q: Can I use my P2 QuadCharger GO to charge my P3 batteries or vice versa?
A: Yes! We now offer a universal GO charging station that will work with either Phantom 2 or Phantom 3 batteries. However you can’t mix batteries in the same charge and you must change to the appropriate DJI power supply for the batteries being charged.

Q: How can I charge Phantom batteries in my car?
A: Please see the links above in “Support”

Q: Why can’t I just use a regulated AC to DC power supply to charge my DJI batteries?
A: LiPo batteries, yes even the DJI Intelligent batteries, require very specific charging profiles. This is the very precise current and voltage levels that change as the battery is charged. It would be very difficult for someone to manually adjust the levels at the precise time required during the charge cycle. In addition, our QuadChargers constantly monitor the battery’s temperature and modify or abort the charging if any over- or under-temperature is detected.

Q: Why didn’t P2G incorporate the power supply in the charger base?
A: We wanted to achieve several design goals:
1) Lowest cost;
2) Lightest storage and carrying case;
3) Maximum flexibility

Adding a high quality switching power supply in the base would have cost much more than an external supply we could buy in quantity from multiple manufacturers. It would have made the products larger, heavier and harder to carry and store. Also we could save money for the users who already have a suitable power supply by offering a separate charger base without a bundled supply.

 

image_001 image_002